Featured Partners

FSU Logo

apvcoatings logo

Adart

LVC Logo

ZIPWALL®

Wolverine Construction

new logo

Hunter logo

The New Electrical Approach Powering Mixed-Use Developments

The New Electrical Approach Powering Mixed-Use Developments

Mixed-use developments are taking over the construction landscape.

Projects like this have set the standard for how developers create their high-density communities to maximise space, return and tenant experience. Here’s the thing though:

An apartment-retail-restaurant-office building has completely different electrical requirements than a single-use building. You can’t simply bolt a residential panel to a commercial sub-board.

These buildings need a smarter, more coordinated electrical approach from day one.

Inside this guide:

  1. What Makes Mixed-Use Electrical So Different?
  2. Why Traditional Electrical Planning Falls Short
  3. The Role Of Electric Generator Installation
  4. Why An All-In Approach Wins
  5. Key Considerations Before Breaking Ground

What Makes Mixed-Use Electrical So Different?

Mixed-use buildings are tricky.

You have domestic renters wanting low noise, consistent electricity while they sleep. Restaurants drawing massive kitchen equipment loads during lunch and dinner rush. Retail stores illuminating their storefronts. Offices powering computers, HVAC units, and elevators throughout the day.

Everything is all under one roof. It all feeds from one incoming feed.

Mixed-use developments accounted for almost 50 percent of delivered commercial and multi-family development from 2010-2020 and that percentage continues to grow. Developers are pursuing these projects because they can achieve higher returns and enjoy greater tenant demand. However, electrical complexity increases exponentially.

That’s why a quality all-in electrical contractor is worth their weight in copper. Rather than assembling three or four trades who don’t communicate, one cohesive team does the entire job from electric generator installation, switchgear, sub-metering, EV charging, and life safety systems, start to finish. The electrical design must consider every tenant type, every load profile, and every “what if” the owner throws at them.

That’s a huge shift from a standard commercial fit-out.

Why Traditional Electrical Planning Falls Short

Old-school electrical planning treats the building like a single tenant.

You size total load, throw a service, then branch off. Ok for a warehouse, or row of retail shops. Not so much when:

  • A coffee shop opens at 5am while the apartments above are dead asleep
  • A medical clinic moves in needing 24/7 backup power
  • Tenants change every few years with totally different load needs
  • New EV chargers get added to the parking deck

Here’s the issue: if the electrical system isn’t flexible, every tenant fit out is a renovation project.

Builders are navigating higher aggregate demand, as well. US electricity demand is expected to increase 2% annually from 2025-2027 — the highest pace of growth in 20 years. Mixed-use developments are squarely in the middle of that boom, particularly as EV chargers, heat pumps and data-intensive commercial tenants become table stakes.

If the electrical system can’t scale, the building can’t keep up.

The Role Of Electric Generator Installation

Now let’s talk about something that often gets pushed to “phase 2″…

Install an electric generator right from day one of your mixed-use development project. Here’s why:

  • Life safety: Elevators, fire pumps, emergency lights, stair pressurization all require standby power
  • Tenant retention: If a restaurant has lost power for 4 hours, they could lose an entire weekend’s worth of food. They will leave
  • Medical or data tenants: Some businesses literally cannot operate without backup
  • Insurance: Some insurers are now requiring backup power for mixed-use properties above a specified size

The tradeoff? Generator placement, fuel storage, exhaust venting and acoustic isolation are much more difficult in a mixed-use building. You can’t locate a loud diesel genset next to a 2-bedroom apartment.

It needs to be built in from the beginning — not added on as an afterthought.

Sizing The Generator Properly

One of the biggest mistakes developers make is undersizing the generator.

Mixed-use loads will fluctuate wildly. You may plan for 60% occupancy and end up with a building packed with high draw tenants. An appropriately sized electric generator installation should consider:

  1. Future tenant changes
  2. EV charging growth
  3. HVAC upgrades
  4. Code-required emergency loads

Mess this up and you’re ripping out a generator in 5 years. Do this right and the building has headroom for generations.

Why An All-In Approach Wins

This is where things get interesting.

One of the established norms in mixed-use electrical work is a spider web of subs. Company A does the service; Company B does the residential panels; Company C does the commercial fit-out; Company D installs the generator. Who yells when something goes wrong? Everyone.

A single-team approach flips that on its head.

You have one team that owns the full electrical scope from design, supply, install, commission and continuing service. Here’s how the advantages quickly add up:

  • One point of contact for the developer and project manager
  • Coordinated design that accounts for every tenant type
  • Fewer change orders because nothing falls between trades
  • Faster commissioning with no finger pointing
  • Long-term service relationship for warranty and upgrades

As a developer running 50 other trades on a project, this is sanity saver.

Key Considerations Before Breaking Ground

Before signing off on the electrical drawings, run through this list:

Plan For Flexibility

Tenants come and go. Design the electrical system to accommodate different load profiles without significant rewiring down the road.

Build In Sub-Metering

Meter every tenant unit separately. This is absolutely required for cost recovery and limiting disputes.

Account For EV Charging

Install conduit/capacity for 40 chargers even if you are only putting 4 in now. Adoption of EVs is accelerating rapidly.

Coordinate The Generator Early

Don’t defer installation of the electric generator to the final 10% of the project. Consideration of placement, ventilation, fuel and acoustics should be determined during design.

Design For Maintenance

Switchgear rooms, generator pads, and main service equipment require accessibility. If access for maintenance is blocked today, that becomes a service emergency tomorrow.

Tying It All Together

Mixed-use developments are great investments, but they demand a totally different electrical mindset.

Thinking about it as another commercial development is a great way to mess it up. Tenants suffer, costs skyrocket, and the building decreases in value over time. To quickly recap, the right approach involves:

  • Designing for multiple tenant types from day one
  • Planning the electric generator installation early
  • Building in flexibility and capacity for future loads
  • Working with one full-scope electrical team instead of a patchwork of subs

If you nail the electrical baseline, everything else about the project rolls downhill. Mess it up, and you will be putting out fires for the entire life of the facility.

That’s why developers are shifting away from legacy approaches and hiring one full-scope electrical team upfront. It’s simpler that way.

Feature Image Source

Share this post :

Facebook
Twitter
LinkedIn
Pinterest

Stay close to the industry.

CCR updates, digital magazines, events, and partner insights.

Current Issue — CCR #10

Editorial & Third-Party Content Notice: Articles, press releases, company announcements, and accompanying media (including photography, graphics, and video) published on this site may be provided by third-party contributors, PR representatives, or wire sources as cited. Authorship and original copyrights remain with their respective holders.

Commercial Construction & Renovation is a registered service provider under the Digital Millennium Copyright Act (DMCA). To submit an inquiry, copyright claim, or formal takedown request, you may view our registered agent listing and official contact details via the U.S. Copyright Office DMCA Designated Agent Directory, or contact our compliance desk directly at publisher@ccr-mag.com.

Receive the CCR 2024 Idustry Report

Get ahead of your Competitors with CCR's FREE Industry Insider's Report 2024!

Always stay two steps ahead of your Competitors. Stay informed with the latest in the Industry. 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

This site uses cookies to ensure that you get the best user experience. By choosing “Accept” you acknowledge this and that ccr-mag.com operates under the Fair Use Act. Furthermore, Changing privacy laws now require website visitors from EEA based countries to provide consent in order to use personalized advertising or data modeling with either Google Ads & Analytics. Find out more on the Privacy Policy & Terms of Use Page and our Editorial & DMCA Notice.