Featured Partners

Adart

FSU Logo

apvcoatings logo

Window Film Depot

new logo

Why Relative Humidity Matters in Buildings

Ever enter a building that just feels sticky for no apparent reason? You walk inside, look at the thermostat and see the temperature is set to 72 degrees, but you can just tell that the humidity is high.

Maybe you’ve walked into a room and noticed paint bubbling off the walls seemingly out of nowhere. While temperature and relative humidity are often discussed together, humidity may be playing a bigger factor in these problems than you realize.

Relative humidity is a scientific way of measuring how much moisture is in the air. Let’s say you have a cold washcloth and a dry one. If you pour a cup of water on each, the dry one will absorb much more water. Heat air acts just like the dry washcloth.

Temperature effects 

Did you know that the exact same amount of water in the air can feel two completely different ways? Based on temperature, the air may feel moist and sticky or dry as a bone. Because of this, temperature and humidity are always linked. You can’t think about one without the other.

Take a glass of ice water on a hot summer day. If you were to place your hand on the glass, you would start to feel water droplets forming on the outside of the glass. This is because the cold glass is cooling the air around it. Cooled air can’t hold as much moisture in it, so the excess water is evaporating onto the glass.

It’s the exact same principle with the air inside your home. During the winter months, when warm air comes into contact with your cold window, condensation will form. Understanding how temperature and humidity work together can help you avoid moisture issues in your building.

Comfort level 

The ideal comfort range for most homes is between 30%-50% relative humidity. Below 30% most people begin to feel discomfort from the dry air. You may experience itchy skin, scratchy throats, and more static shocks when touching metal objects like doorknobs.

On the other hand, if you begin to feel like the air is sticky or moist you are probably above 60% relative humidity. This is because your body’s natural cooling system doesn’t work as well. When you sweat, the water evaporates from your skin and cools you off. If the air is full of moisture, your sweat can’t evaporate as fast.

Health concerns 

Another reason relative humidity matters is for your health. Not only does it feel better, but it can also keep you from getting sick as often. Studies show that viruses and bacteria spread the easiest at extreme humidities and dryness. So, if you keep your humidity in the middle, it may help you avoid getting sick.

Dry air can have negative impacts on your sinuses and throat. Both your nose and throat contain mucous membranes that protect you from germs and pollutants. These membranes need moisture to function properly and can become irritated when they dry out.

High humidity attracts mold and dust mites. Mold can cause lots of health problems, and both of these nuisances can trigger allergy and asthma attacks. If you suffer from any of these conditions, you will probably feel better if you keep your humidity in check.

Damage to building 

This may be the most important reason why relative humidity matters. NHS mentioned to us that too much moisture can destroy your building quicker than almost anything else aside from fire and severe weather. As we mentioned earlier, if your humidity is too high for too long you will begin to grow mold.

Not only is mold nasty to look at, but it can cause major damage to your buildings materials. This can also pose a health hazard to you and your family. That is why preventing mold growth in your building should be one of your biggest priorities.

Too much moisture will also cause wooden building materials to expand. As the air becomes dryer, that wood will try to return to its original size. After constantly expanding and contracting, your wood can become damaged and start to warp or crack.

You may even notice gaps around your doors and window as they expand and contract. Too little humidity isn’t much better as it will cause your metal building components to rust and corrode.

Condensation 

We touched on condensation earlier, but it’s important enough to bring up again. When your indoor air hits a cold surface like a window condensation will form. During the winter you will typically see water condensing on the inside of your windows.

But did you know that it can form inside your walls as well? When warm air comes into contact with a cold surface condensation will happen. This can be extremely bad if you have it happening within your walls.

You don’t want moisture accumulating inside the walls of your building. Not only will this lead to mold but it will rot your wooden frame and damage your insulation. A good building envelope will prevent condensation from occurring within your walls.

Newer homes are generally built tighter than older homes. This is great for saving money on energy bills but bad for moisture control. You have to make sure your home is mechanically ventilated to prevent moisture from getting trapped inside.

Measuring humidity 

In order to control humidity, you must know what levels you are dealing with. You can buy cheap hygrometers that will allow you to measure the humidity in each room. Once you know what you’re working with you can make smart decisions.

Monitor your humidity levels and take notes on different times of the year. You should check your humidity levels regularly to catch any problems quickly. If you find that your humidity is high you need to find the source of excess moisture.

Real-life example: How well are we measuring/restricting indoor relative humidity?

The largest amount of data we have on indoor humidity levels and actual building performance in the UK comes from a… small monitoring study commissioned by researchers investigating ventilation and indoor air quality in new homes. That study monitored RH levels and associated issues such as condensation & mould growth across real occupied homes.

Monitoring indoor RH levels over time… 

RH levels were monitored in different rooms of houses. Weekly averages were often higher than 65 % in multiple dwellings – levels where you would expect condensation/mould problems indoors. Occupants reported experiencing condensation or mold in rooms where RH levels were recorded higher than outdoor RH levels, demonstrating issues with excess moisture.

Link: Official building monitoring report https://assets.publishing.service.gov.uk/media/5d91be8040f0b65e62c6cfb0/Research_-_ventilation_and_indoor_air_quality.pdf  

What does this mean for homes in the UK?

Don’t mistake this for a laboratory test. This is REAL data collected from occupied homes in the UK.

Several homes measured typical weekly average RH levels > 65 %. Occupants saw condensation and occasional mold growth throughout the monitoring period.

The takeaway: High indoor humidity levels cause moisture problems in buildings & poses health risks for occupants.

Relative humidity FAQ’s 

What is relative humidity? 

Relative humidity (RH) measures how much moisture vapour is in the air compared to how much it could hold at that temperature. Warm air can hold more moisture than cold air. This is why a room can feel clammy or dry depending on the temperature even if there’s the same amount of moisture in the air (AKA condensation forming on a cold glass).

Why does RH matter for how a building feels?

If it’s too high or too low, humidity will impact how hot or cold you feel. RH affects how heat transfers from your body to the air (via sweating). High RH makes you feel sticky because sweat doesn’t evaporate as easily off your skin. Low RH can make you feel cold because your skin dries out.

Also, most building materials react to RH levels. Think about how wood swells with moisture and shrinks as it dries out.

What is the ideal RH level indoors? 

Building scientists and indoor air quality researchers generally agree that between 40% – 60% RH is ideal for comfort and health. Below 40%, air tends to feel dry and can aggravate skin and lungs. Above 60%, many biological pollutants grow indoors like mold, fungi and dust mites.

How does indoor humidity affect our health? 

Humidity can impact the spread of bacteria, viruses and allergens. Several studies show mid-range humidity levels (roughly 40%–70% RH) are associated with a lower rate of respiratory and allergic symptoms. Why? Most microbes and toxins don’t like moderate humidity levels.

Why does moisture collect inside my home? 

Condensation happens when your warm indoor air hits a surface that’s cold enough that it can’t hold all that moisture. Suddenly that moisture has nowhere to go, so it accumulates on your wall or windowsill as a liquid. Indoor humidity will cause condensation on cold surfaces inside your home.

Can high humidity ruin my house? 

Yes. High humidity indoors can rot wooden support beams, warp floorboards and ruin walls. That’s why it’s important to control humidity levels indoors. Not only will it help you feel more comfortable, but it could save your house.

How do I know what my RH levels are?

Any local hardware store sells inexpensive devices called hygrometers that measure the RH level in each room. Try measuring RH in different rooms throughout the year to understand patterns and seasons of high humidity occurrences. From there you can decide how to manage humidity levels appropriately with ventilation, dehumidifiers and/or humidity controlled heating.

Do new builds have humidity issues? 

Newer, energy-efficient homes are typically tighter with less air infiltration. While this saves on energy costs it can cause issues with moisture if there isn’t mechanical ventilation or humidity control within the dwelling. Indoor air quality IS indoor design…. both matter equally.

Final Words  

Did you know that relative humidity in your home affects more than just how comfortable you feel? If you don’t control moisture levels in your buildings, you could be setting yourself up for costly repairs and a lower quality of life. By controlling relative humidity, you can protect your investment and keep your family healthier.

Share this post :

Facebook
Twitter
LinkedIn
Pinterest

Stay close to the industry.

CCR updates, digital magazines, events, and partner insights.

Current Issue — CCR #10

Editorial & Third-Party Content Notice: Articles, press releases, company announcements, and accompanying media (including photography, graphics, and video) published on this site may be provided by third-party contributors, PR representatives, or wire sources as cited. Authorship and original copyrights remain with their respective holders.

Commercial Construction & Renovation is a registered service provider under the Digital Millennium Copyright Act (DMCA). To submit an inquiry, copyright claim, or formal takedown request, you may view our registered agent listing and official contact details via the U.S. Copyright Office DMCA Designated Agent Directory, or contact our compliance desk directly at publisher@ccr-mag.com.

Receive the CCR 2024 Idustry Report

Get ahead of your Competitors with CCR's FREE Industry Insider's Report 2024!

Always stay two steps ahead of your Competitors. Stay informed with the latest in the Industry. 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

This site uses cookies to ensure that you get the best user experience. By choosing “Accept” you acknowledge this and that ccr-mag.com operates under the Fair Use Act. Furthermore, Changing privacy laws now require website visitors from EEA based countries to provide consent in order to use personalized advertising or data modeling with either Google Ads & Analytics. Find out more on the Privacy Policy & Terms of Use Page and our Editorial & DMCA Notice.