Featured Partners

Adart

FSU Logo

apvcoatings logo

3mg PSC

Rockerz Black 101822

new logo

Hunter logo

Rogue Architecture

Why AV Planning Belongs Earlier in the Design Process

Why AV Planning Belongs Earlier in the Design Process

Tenants no longer treat strong connectivity and integrated AV as a bonus. They expect it, the same way they expect working elevators and reliable HVAC. Yet on most commercial projects, technology infrastructure still enters the conversation only after the drawings are locked, and the ceiling grid is set. That sequencing creates problems that are expensive, and sometimes impossible, to fix later.

The gap isn’t a lack of good AV vendors. It’s timing. When technology planning arrives after the design is done, architects and owners work around decisions that should have shaped the design itself.

Why AV Planning Belongs in the Blueprint Stage

Retrofitting AV after construction is rarely a clean process. Cable pathways have to be fished through finished walls or run exposed along surfaces never designed to hide them. Ceiling heights that looked generous on paper suddenly feel tight once projector mounts and display brackets need structural backing that nobody specified. A conduit that should have been roughed in during framing now gets added after the fact, often at two or three times the cost.

More than 45% of new commercial buildings are now designed with integrated AV and IoT systems from the start, according to Business Research Insights. That figure reflects a change in how architects and developers approach technology, not as a finishing touch, but as a load-bearing part of the design brief.

This is where bringing in commercial audio visual consultants during programming and schematic design pays off. A firm like TMC works alongside the architecture team early enough to influence ceiling heights, structural load points for displays, and cable pathway routing before any of it is set in concrete, drywall, or steel. Instead of architects guessing at technology requirements and hoping the AV integrator can make it work later, the two disciplines plan together from day one.

The Real Cost of Treating Technology as an Afterthought

When AV and technology planning show up late, the costs rarely stay contained to a single line item. Budget surprises appear when structural modifications are needed to support equipment nobody accounted for during design. Compliance gaps emerge when telecom rooms are undersized or poorly located. Coordination failures multiply when architecture, MEP, and IT teams work from different assumptions about where cabling, power, and equipment will actually live.

The scale of what’s at stake keeps growing. The professional AV market is projected to grow from $424.69 billion in 2025 to $479.23 billion in 2026, a 12.8% compound annual growth rate, according to The Business Research Company. That expansion signals how central technology infrastructure has become to commercial construction, and how much money moves through decisions made too late to be made well.

Owners who understand how technology is reshaping build timelines and budgets are starting to treat AV consulting the way they’ve long treated structural or MEP engineering: a discipline that needs a seat at the table early, not a vendor call placed after the general contractor is already mobilized.

Connectivity Standards Are Becoming Non-Negotiable

Certification frameworks are formalizing what used to be an informal expectation. WiredScore’s Wired Certification Guidelines for commercial developments were built on an evaluation of more than 900 commercial office buildings across the US and UK, covering six infrastructure sections, including telecom room planning, riser planning, electrical resiliency, and mobile readiness. A building that doesn’t plan for these elements from the start faces a harder, costlier path to certification later.

BOMA’s BEST Smart Buildings certification takes a similar approach, evaluating buildings across six pillars, including connectivity and network integration. BOMA Canada has signed a letter of intent with BOMA International to expand the program into the US, according to Buildings.com.

None of this happens in a vacuum. The National Institute of Standards and Technology maintains the Smart Building Automation and Control Testbed, which supports standards such as BACnet that enable building automation systems from different vendors to communicate. Architects who understand this interoperability requirements early can design telecom rooms and electrical capacity to meet certification thresholds, rather than discovering shortfalls during a post-construction audit.

Developers pursuing certification often start by reviewing connectivity certification guidelines for new developments, which lay out exactly what evaluators look for before a project ever breaks ground.

What Early Collaboration Actually Looks Like

In practice, early AV involvement means a technology consultant joins the project during programming, sitting in on the same early meetings as the architect and MEP engineer, rather than waiting for a call once construction documents are underway. During schematic design, the consultant helps define ceiling heights, structural load requirements, and rough conduit pathways. During design development, they refine equipment specifications and coordinate with electrical and mechanical systems. Through construction administration, they verify that what is built matches what was designed, catching conflicts before they become change orders.

This workflow directly addresses the pitfalls described earlier: expensive retrofits, undersized telecom rooms, and ceiling heights that don’t accommodate displays. When AV planning runs parallel to architectural design instead of trailing behind it, those problems mostly don’t happen.

The approach fits naturally into the broader push toward next-generation facilities built around mission-critical technology, where buildings are judged on how well their infrastructure supports the technology tenants actually use, not just how the space looks on a floor plan.

Technology Infrastructure Is Now Core Architectural Scope

Treating AV planning as a late-stage add-on made sense when buildings required little more than a lobby television. That’s not the market architects’ design anymore. Tenants expect certified connectivity and integrated AV as infrastructure, not a feature.

Architects who loop in technology consulting expertise during programming and schematic design, rather than after the drywall goes up, tend to deliver buildings that meet tenant expectations, pass certification standards on the first attempt, and stay closer to their original budgets. It’s a recognition that technology infrastructure belongs on the same list as structural, mechanical, and electrical planning, because that’s where tenants and certification bodies already place it.

Feature Photo credit: TMC

Share this post :

Facebook
Twitter
LinkedIn
Pinterest

Stay close to the industry.

CCR updates, digital magazines, events, and partner insights.

Current Issue — CCR #10

Editorial & Third-Party Content Notice: Articles, press releases, company announcements, and accompanying media (including photography, graphics, and video) published on this site may be provided by third-party contributors, PR representatives, or wire sources as cited. Authorship and original copyrights remain with their respective holders.

Commercial Construction & Renovation is a registered service provider under the Digital Millennium Copyright Act (DMCA). To submit an inquiry, copyright claim, or formal takedown request, you may view our registered agent listing and official contact details via the U.S. Copyright Office DMCA Designated Agent Directory, or contact our compliance desk directly at publisher@ccr-mag.com.

Receive the CCR 2024 Idustry Report

Get ahead of your Competitors with CCR's FREE Industry Insider's Report 2024!

Always stay two steps ahead of your Competitors. Stay informed with the latest in the Industry. 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

This site uses cookies to ensure that you get the best user experience. By choosing “Accept” you acknowledge this and that ccr-mag.com operates under the Fair Use Act. Furthermore, Changing privacy laws now require website visitors from EEA based countries to provide consent in order to use personalized advertising or data modeling with either Google Ads & Analytics. Find out more on the Privacy Policy & Terms of Use Page and our Editorial & DMCA Notice.