Steel columns are a key element in modern construction. They provide vertical support, which in turn transfers loads from beams, slabs, and roofs to the foundation. In their absence, most buildings would not be stable or safe.
However, some steel columns differ significantly from one another. There is great variation in their shape, design, and structure. Also, it is to each of these that a specific role is assigned. In this guide, the most common steel column types will be covered in simple terms.
What is a Steel Column?
A steel pillar is a vertical structural element made of steel. It’s to support weight and transfer loads safely to the ground.
Steel is used extensively as a material for columns because of its strength, durability, and flexibility. It is also able to bear heavy loads and resists bending, which makes it the perfect choice for buildings, bridges, warehouses, and industrial structures, according to Steel Column Supplier – Dajin Steel.
1. I-Section Steel Columns
I-beam columns also go by the name of H-beams, as they are shaped like the letters “I” or “H.”
These columns have a main horizontal flange on each side and a vertical web. The web is responsible for the load, and flanges for bending.
They are commonly used in:
- High-rise buildings
- Bridges
- Industrial warehouses
I-section columns are also very popular and for good reason. They are the most used type of structural steel.
2. Circular Hollow Steel Columns (CHS)
Circular steel tubes are what you’ll see for hollow steel columns. They have an empty center, which makes them lightweight yet very strong.
These columns, which are designed to evenly distribute stress, are also very good at withstanding wind and seismic forces.
They are commonly used in:
- Modern architectural buildings
- Stadiums
- Commercial structures
They also have a very smooth look.
3. Square and Rectangular Hollow Sections (SHS & RHS)
These columns may be empty in structure, but there are square and rectangular forms. Also, it is found that they have flat surfaces, which in turn facilitate connection with beams and other structural elements.
They provide many directions.
They are commonly used in:
- Factories
- Warehouses
- Industrial sheds
These columns are of a strong build but less decorative.
4. L-Section Steel Columns
L-section columns are in the shape of the letter “L.” Also known as angle sections.
They do not typically serve as main load-bearing columns. Instead, they support lesser loads or act as reinforcement members.
They are commonly used in:
- Light structures
- Trusses
- Temporary buildings
L-type columns are easy to install and cost-effective.
5. T-Section Steel Columns
T-section columns are in the shape of the letter “T.” They have a vertical and a horizontal part.
These columns may support loads in some directions, but do not perform well against twisting forces.
They are used in:
- Medium-size structures
- Beams and supports
- Structural frameworks
They also go along with other steel sections.
6. Built-Up Steel Columns
Built-up columns are formed by joining two or more steel sections. For example, two I-sections can be welded together to create a stronger column.
These are also used when standard sections do not suffice.
They are commonly used in:
- Skyscrapers
- Large industrial buildings
- Bridges
Built-in columns offer high strength and flexibility in design.
7. Composite (Concrete-Filled) Steel Columns
Steel is used for the outer shell, which has concrete on the inside.
This setup is for strength and stability. Steel is for tension; concrete is for compression.
They are used in:
- High-rise buildings
- Heavy industrial structures
- Earthquake-resistant designs
Composite structures are very durable and load-bearing.
How to Choose the Right Steel Column
Selecting the right steel column is key to safety and cost efficiency. Here are some witches:
- Load Requirement
Heavy-duty loads require strong sections such as I-beams or built-up columns. For light loads, L or T sections may be used.
- Building Height
Tall buildings require columns that resist buckling, which may be of a hollow or composite design.
- Design and Space
Circular columns are well-suited for modern design. Square and rectangular columns do better for practical construction.
- Budget
Standard sections, such as I-beams, are at a lower price point. For composite and built-up columns, a higher cost is required, but in return, greater strength is achieved.
Conclusion
Steel is the basis of today’s construction. It gives fundamental support and stability to buildings and structures.
Different types of steel columns are used for different applications. I sections are strong and very common. Hollow sections are also very versatile in design. L and T sections do well for light loads, and built-up and composite columns are used in heavy-duty structures.
These types of structures help engineers, builders, and designers to choose the right solution for safe and efficient construction.







