Spray foam costs more than fiberglass, and homeowners want to know whether it earns the difference. The answer depends on where you are insulating, what you want it to do, and how long you plan to stay. Here is a direct comparison to help you choose.
How they perform
R-value per inch is the clearest difference.
- Closed-cell spray foam delivers about R-6 to R-7 per inch
- Open-cell spray foam delivers about R-3.5 to R-3.9 per inch
- Fiberglass batts deliver about R-3 to R-4 per inch
- Blown cellulose delivers about R-3.2 to R-3.8 per inch
Closed-cell foam gives you roughly twice the R-value in the same thickness, which matters when space is tight, such as in a shallow rafter cavity.
Air sealing is the real difference
Fiberglass slows heat but lets air pass through. Spray foam expands as it cures and seals the gaps around it, so it insulates and air seals in one step. That combination is why foam often outperforms its R-value on paper. If your home is drafty, sealing the leaks may matter more than adding thickness. Looking into spray foam insulation near me makes sense when air leaks are the main problem.
Cost and payback
Spray foam generally costs two to three times more than fiberglass per square foot. The payback comes through lower energy bills and better comfort over years, not months. If you plan to stay in the home long term, that math often works. For a short stay or a tight budget, fiberglass in an easy-access attic can be the better value.
Where each one fits
Match the material to the job.
- Spray foam suits rim joists, crawl spaces, cathedral ceilings, and irregular framing
- Closed-cell foam adds structural rigidity and resists moisture
- Fiberglass batts suit standard stud and joist bays with easy access
- Blown-in loose fill suits open attic floors
Many homes use both, with foam where sealing matters and fiberglass where it does not.
Points to weigh before you commit
A few practical factors affect the decision.
- Spray foam requires professional installation and curing time
- Closed-cell foam acts as a vapor barrier, which changes wall assembly plans
- Fiberglass is easier to remove or replace later
- Foam is difficult to inspect behind once installed
Get an assessment first
The right answer depends on your house. An insulation contractor in Brainerd can test for air leaks, check your current levels, and price both options for the specific areas you want treated. Ask for a written comparison so you can see the cost and expected performance side by side.
Spray foam is worth the investment where air sealing and limited space matter most. Fiberglass remains a strong value in open, accessible areas. Match the material to the location and your timeline, and you get the best return either way.


