Featured Partners

FSU Logo

Adart

apvcoatings logo

Rockerz Black 101822

Self-Tapping Masonry Screws: Basics from CONFAST

Self-tapping screws are designed to create their own threads as they are driven into masonry. Unlike other fasteners, you do need to drill the hole or tap threads in a separate step. A pre-drilled hole creates a starting point for the screw and helps guide its threads into place.

How the Tapping Process Works

When driven into masonry, the screw’s thread performs all the cutting, forming threads in the base material up to a maximum of about 1-3/4″ deep. The actual tapping depth depends on the hardness and abrasiveness of the masonry. As the screw cuts, it produces dust. Masonry screws are engineered to clear dust away from the area to prevent binding. For best results, the drilled hole should be slightly deeper than the screw’s embedment depth to provide extra space for dust to settle, ensuring smooth installation.

 

Confast screw 2CONFAST Screws1

Images Courtesy of: Confast

Correct Hole Diameter

The hole size is critical to performance and must follow the manufacturer’s specifications:

-3/16″ screw → Drill a 5/32″ hole

-1/4″ screw → Drill a 3/16″ hole

Only use ANSI-standard carbide-tipped masonry bits to achieve the precise tolerances required. Any deviation from the correct hole size can significantly reduce holding strength.

Drilling the Hole

For proper hole shape and size, use an ANSI-standard carbide-tipped bit in a hammer drill set to hammer-and-rotation mode. Once the hole is drilled, clean it thoroughly using a wire brush, compressed air, or a vacuum (or a combination of these). Removing dust and debris is essential to achieving maximum holding power.

Sizes and Dimensions

Masonry screw dimensions are identified by two numbers:

-Diameter – either 3/16″ or 1/4″

-Length – available from 1-1/4″ to 6″ (availability varies by diameter)

Choosing the right screw size:

-Diameter: Determined by the required holding strength and the hole size in the material being fastened.

-Length: Add the thickness of the material being fastened to the required embedment depth.

-Minimum embedment: 1″

-Maximum embedment: 1-3/4″

Example: If fastening a 1/2″ thick fixture with minimum embedment, use a screw at least 1-1/2″ long.

Head Styles:

Masonry screws come in two head styles:

-Flat Countersunk Phillips – For flush, smooth finishes where the screw head sits below the surface.

-Hex Washer Head – For applications where the screw head remains on top of the surface, offering higher driving torque.

 Material Types

-Blue-coated carbon steel – Ideal for dry, indoor applications.

-410 stainless steel with protective coating – Recommended for outdoor or high-moisture environments.

Troubleshooting:

If the screw spins without gripping, the hole might be too large or the base material too soft. You may need to use a longer screw, try a larger diameter screw, or use an expanding concrete anchor.

Safety:

Always wear appropriate safety equipment, including eye and ear protection, work gloves, and a dust mask when drilling into masonry.

If you would like to learn more about CONFAST screws or to order visit: https://www.confast.com/confast-concrete-screws

Confast welcomes the opportunity to earn your business. Order online 24/7 @ www.confast.com, call us (800) 966-9617, or email sales@confast.com to learn more about how we can support your masonry screw needs.

Share this post :

Facebook
Twitter
LinkedIn
Pinterest

Stay close to the industry.

CCR updates, digital magazines, events, and partner insights.

Current Issue — CCR #10

Editorial & Third-Party Content Notice: Articles, press releases, company announcements, and accompanying media (including photography, graphics, and video) published on this site may be provided by third-party contributors, PR representatives, or wire sources as cited. Authorship and original copyrights remain with their respective holders.

Commercial Construction & Renovation is a registered service provider under the Digital Millennium Copyright Act (DMCA). To submit an inquiry, copyright claim, or formal takedown request, you may view our registered agent listing and official contact details via the U.S. Copyright Office DMCA Designated Agent Directory, or contact our compliance desk directly at publisher@ccr-mag.com.

Receive the CCR 2024 Idustry Report

Get ahead of your Competitors with CCR's FREE Industry Insider's Report 2024!

Always stay two steps ahead of your Competitors. Stay informed with the latest in the Industry. 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

This site uses cookies to ensure that you get the best user experience. By choosing “Accept” you acknowledge this and that ccr-mag.com operates under the Fair Use Act. Furthermore, Changing privacy laws now require website visitors from EEA based countries to provide consent in order to use personalized advertising or data modeling with either Google Ads & Analytics. Find out more on the Privacy Policy & Terms of Use Page and our Editorial & DMCA Notice.