Featured Partners

apvcoatings logo

Adart

FSU Logo

LVC Logo

Hunter logo

new logo

Wolverine Construction

SignWav Elite

Proactive Planning and Collaboration Keep Projects on Track

Proactive Planning and Collaboration Keep Projects on Track

Special Inspections, required by building code in most states for commercial and multifamily projects involving critical life-safety structural building components, are often misunderstood by the very teams responsible for delivering a project on time and on budget.

Typically identified by the architect or engineer serving as the registered Design Professional in Responsible Charge (or DPIRC, sometimes also referred to by other titles such as the Structural Engineer of Record or SER and Engineer of Record or EOR), the work of Special Inspectors becomes part of the general contractor’s day-to-day reality starting with preconstruction meetings.

To many general contractors, Special Inspections can present as a layer of oversight that slows work, complicates scheduling and creates paperwork headaches. When well-managed, however, Special Inspections help projects avoid costly rework, failed inspections, schedule disruptions and disputes later in construction.

Understanding how the process works, where problems typically arise and how to coordinate inspections proactively can help contractors use the process to support a project’s on-time and on-budget delivery.

Special Inspections Origins

Special Inspections grew out of lessons learned following a series of high-profile structural failures that exposed gaps in oversight, communication and accountability on building projects.

In the early 1980s, U.S. House Subcommittee hearings examining a number of these structural failures concluded that two recurring problems can contribute to costly and/or dangerous outcomes: the lack of organization and communication between parties on construction projects and insufficient involvement and inspection by the DPIRC during construction.

The subcommittee’s recommendations eventually led to a merger of several regional codes into the International Building Code (IBC), IBC Chapter 17, which established the more standardized and clearly defined process of Special Inspections.

Know Your State, Local Inspection Requirements

Special Inspections are required by building code in most states for qualifying commercial and multifamily projects. Most states have adopted the International Building Code’s Chapter 17 requirements, although enforcement and specific provisions vary by state and municipality.

Types of construction activities where the code requires Special Inspections are identified in Section 1705 of IBC’s Chapter 17 – not based on project size but on the presence of specific structural elements the code defines. Similarly, the scope and frequency of inspections are established in the statement of Special Inspections (completed by the DPIRC) and coordinated to ensure compliance with the approved construction documents.

QA, QC, Special Inspection Roles

Quality Assurance (QA), owner-focused and led by the DPIRC, is about preventing defects before they occur by establishing and monitoring processes and standards. Quality Control, a general contractor function, identifies and corrects defects during the project.

Special Inspection, a legal requirement under most state building codes, verifies critical building systems’ integrity ensuring safety and regulatory compliance.

When acting as a Special Inspector under IBC requirements, the inspector is responsible for maintaining inspection records, issuing interim reports at agreed intervals and submitting a final report confirming whether the work complies with the approved construction documents. These reports are often required to be reviewed and approved by a Professional Engineer (PE).

Key roles in Special Inspections include:

  • Local building official – Sets the criteria for inspection personnel by inspection type as well as verifies completion of Special Inspections.
  • Owner – Or designee, hires the Special Inspections provider.
  • DPIRC – Prepares and submits to the building official the statement and schedule of Special Inspections and oversees the inspection program itself to ensure adherence to plans.
  • Special Inspector – Observes and tests the requiring components and work types and provides reports on same to the building official, owner, DPIRC and general contractor.
  • Testing laboratory – Whether off site or in the field, must be a recognized organization approved by the building official that regularly performs testing, inspection or certification services.
  • General Contractor – Reviews and understands the statement and schedule of Special Inspections; provides access and adequate notice to the Special Inspector to complete the inspections; and corrects any reported deficiencies.

iStock 1053025324The Special Inspector

While there is an International Code Council (ICC) Special Inspector certification program, it is at the sole discretion of each jurisdiction’s building official to evaluate a Special Inspector’s qualifications as part of approving the provider under Chapter 17 of the IBC for a given project.

In practice, the Special Inspector typically is the licensed professional in responsible charge, while Special Inspection Agents or technicians perform much of the day-to-day testing and inspection work under that oversight.

That said, qualities to look for in a Special Inspector include demonstrated competence and experience relevant to the project, training and certifications, track record of experience as Special Inspector on similar projects, strong communication skills, and the ability to be responsive and prompt.

Best Practices: Incorporating Special Inspectors in Project Planning and Pacing

Set a high bar for proactive communications. This begins with the owner. An owner who facilitates introductions between the general contractor, design team, building official and Special Inspector before work begins sets the standard for ensuring efficient coordination for quality project delivery.

Host a pre-construction meeting. Before project kick-off, the team discusses project details, sets expectations and covers critical issues such as:

  • Project overview – Scope and size, construction type and occupancy, major structural systems, project milestones, target completion date
  • Code basis and jurisdictions – Code and local amendments/enforcement expectations, permits and sequencing, reporting, handling deficiencies, sign off and close out
  • State of Special Inspections review – Types required, continuous versus periodic
  • Scheduling and notification procedures – Advanced notice, inspection requests, hold points, sequencing elements
  • Reporting, documentation and communication protocols – Report distribution, dailies, deficiency logs, corrective action tracking, escalation, digital platforms, photo documentation
  • Milestone meetings – Forecast future coordination for key construction elements
    Open issues and action items
  • Confirmation – Communication chain, inspection request procedure, reporting expectations, next meeting date(s), project readiness

Commit to collaborating among all parties. The goal is to create a more efficient and cost-effective construction process that benefits both the owner and the public. Early and ongoing collaboration, particularly between the general contractor and Special Inspector, prevents costly rework due to issues caught too late in the process, and thus helps ensure the project stays on budget and schedule.

Build inspections directly into the project schedule. Treat Special Inspections as critical path activities. Define hold points, notification requirements and milestone inspections early so inspections are not treated as last-minute events.

Construction projects present multiple challenges—from the common difficulty of securing skilled labor to problems particular to Special Inspections like inconsistent enforcement of code requirements across different jurisdictions. In every instance, when coordination fails and rework is required, it is the general contractor who bears the cost.

A successful project will treat Special Inspectors like partners, communicating and coordinating to keep inspections aligned with schedules, reduce avoidable disruptions and streamline the documentation required to demonstrate that work was completed in accordance with the approved plans and specifications.

This, ultimately, helps projects move more efficiently toward the desire result – a certificate of occupancy.


Matthew Lehmenkuler, P.E., is a National Director with Terracon who has built his career in construction materials testing and inspection with experience that spans major infrastructure, transportation and commercial projects.

Share this post :

Facebook
Twitter
LinkedIn
Pinterest

Stay close to the industry.

CCR updates, digital magazines, events, and partner insights.

Current Issue — CCR #10

Editorial & Third-Party Content Notice: Articles, press releases, company announcements, and accompanying media (including photography, graphics, and video) published on this site may be provided by third-party contributors, PR representatives, or wire sources as cited. Authorship and original copyrights remain with their respective holders.

Commercial Construction & Renovation is a registered service provider under the Digital Millennium Copyright Act (DMCA). To submit an inquiry, copyright claim, or formal takedown request, you may view our registered agent listing and official contact details via the U.S. Copyright Office DMCA Designated Agent Directory, or contact our compliance desk directly at publisher@ccr-mag.com.

Receive the CCR 2024 Idustry Report

Get ahead of your Competitors with CCR's FREE Industry Insider's Report 2024!

Always stay two steps ahead of your Competitors. Stay informed with the latest in the Industry. 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

This site uses cookies to ensure that you get the best user experience. By choosing “Accept” you acknowledge this and that ccr-mag.com operates under the Fair Use Act. Furthermore, Changing privacy laws now require website visitors from EEA based countries to provide consent in order to use personalized advertising or data modeling with either Google Ads & Analytics. Find out more on the Privacy Policy & Terms of Use Page and our Editorial & DMCA Notice.