If you’re considering replacing your boiler with an air source heat pump, one of the first questions you’ll ask is:
“How much will it cost?”
The honest answer is that it depends on your home and the type of installation required.
Before accepting an installation quote, an independent pre-installation design and heat loss review can help confirm whether the proposed heat pump, radiators and overall system have been correctly designed for your property.
A straightforward installation into a modern property with suitable radiators will cost significantly less than a full heating system upgrade. The size of the property, existing pipework, radiator output and hot water requirements can all affect the final quotation.
Typical Air Source Heat Pump Installation Costs
As a general guide, a simple air source heat pump replacement typically costs between:
£11,500 and £13,000
This would usually include:
- Air source heat pump
- Hot water cylinder
- Standard controls
- Installation and commissioning
- MCS certification
- Boiler Upgrade Scheme application, where eligible
If your existing heating system is already suitable, this type of installation is often the most cost-effective option.
However, homeowners should check exactly what is included in the quotation. Electrical work, radiator changes, removal of the old boiler or longer pipe runs may sometimes be priced separately.
Boiler Upgrade Scheme Grants
The UK Government currently offers generous grants towards the cost of install a heat pump through the Boiler Upgrade Scheme (BUS).
The grant available depends on the heating system you’re replacing and whether your property meets the eligibility requirements.
From 21 July 2026, the available grants include:
- Replacing an oil boiler in an eligible off-gas-grid property: up to £9,000
- Replacing an LPG boiler in an eligible off-gas-grid property: up to £9,000
- Replacing a gas boiler: £7,500
- Replacing an electric heating system: £7,500
These grants are normally applied for by your MCS-certified installer and deducted from the installation price, meaning you don’t usually need to claim the money yourself.
Your installer should confirm your eligibility and clearly show the grant discount within the quotation before the installation begins.
What Can Increase the Cost?
Every home is different, and some properties require additional work to ensure the heat pump performs efficiently.
Radiator Upgrades
Heat pumps generally operate at lower flow temperatures than traditional boilers.
If your existing radiators are too small, some or all may need replacing with larger emitters. The number and size of the radiators required can make a noticeable difference to the overall project cost.
A room-by-room heat loss calculation should be used to determine whether the existing radiators can provide enough heat at the proposed flow temperature. Guessing may lead to poor performance or unnecessary radiator upgrades.
Pipework Alterations
Older heating systems sometimes use undersized pipework.
Where this restricts water flow, sections of the heating system may need upgrading. Simple pipework alterations are common, while complete repiping will naturally increase costs further.
Long pipe runs, restrictive fittings or poorly balanced heating circuits can also affect performance, even when the heat pump itself has been correctly sized.
Underfloor Heating
Some homeowners choose to install underfloor heating as part of a renovation.
Although this can provide excellent comfort and efficiency, it is usually a much larger project involving new floors, insulation and heating pipework.
As a result, complete underfloor heating systems are generally one of the more expensive types of heat pump installation.
However, underfloor heating is not essential for every heat pump. Correctly sized radiators can also work effectively, so the decision should be based on the property and the homeowner’s renovation plans.
Electrical and Installation Requirements
Some homes may need electrical upgrades, a suitable outdoor base, condensate drainage or additional space for the hot water cylinder.
These items may not represent a major cost individually, but together they can change the final installation price. A detailed site survey should identify these requirements before work begins.
Is the Cheapest Quote Always the Best?
The lowest quotation may not include everything needed for the system to perform properly.
A good installer should carry out:
- A room-by-room heat loss calculation
- Correct heat pump sizing
- Radiator assessment
- Hot water cylinder sizing
- Weather compensation setup
- Full commissioning
These design stages often determine how efficiently the system will run for the next 15–20 years.
Some installers use specialist partner installer support when they need additional technical guidance to design, commission to install a heat pump correctly, especially in more complex properties.
When comparing quotes, look beyond the heat pump brand and headline price. Ask what flow temperature the design is based on, which radiators will be changed, how the controls will operate and what support is available after commissioning.
For homeowners who want a second opinion before committing, UK Heat Pump Help provides independent pre-installation design reviews.
The service reviews areas such as heat loss calculations, system sizing, radiator suitability and the overall proposed design. This can help homeowners understand whether a quotation is technically sound before spending thousands of pounds on an installation. Fusion: Get the Design Right Before You Commit
Real Cost of Install a Heat Pump
Most straightforward air source heat pump installations in the UK currently cost around £11,500–£13,000 before any government grant is applied.
If your property requires radiator upgrades, pipework alterations or underfloor heating, the overall investment will increase accordingly.
With grants of up to £9,000 available for eligible oil and LPG replacements from 21 July 2026, and £7,500 for most other qualifying heating systems, a heat pump is now more affordable than many homeowners expect.
The most accurate way to understand the likely cost is to have your property properly assessed. Every home is different, and a well-designed system will almost always deliver better comfort and lower running costs than one installed on price alone.
For additional guidance before choosing an installer or accepting a quotation, homeowners can visit UK Heat Pump Help. The service can help you better understand heat pump costs, system design and the questions you should ask before moving forward.




