Featured Partners

Adart

apvcoatings logo

FSU Logo

new logo

LVC Logo

Hunter logo

Wolverine Construction

Window Film Depot

Construction Worker Rights After Equipment Failure on the Jobsite

A crane cable snaps. A scaffold plank gives way. A skid steer’s brakes fail on a slope. These moments happen fast, and by the time anyone sorts out what went wrong, a worker is already hurt and the job site is already shut down for the day. Construction remains one of the more dangerous fields to work in. Roughly one in five workplace deaths in the U.S. happens in construction, and equipment is behind a good share of them.

What often gets missed in the aftermath is that workers’ compensation, while it kicks in almost automatically, isn’t the end of the story. Depending on what actually caused the equipment to fail, there can be someone else on the hook too, which is usually the point where an injured worker or their family ends up talking to a personal injury attorney to figure out where one system stops and another begins.

Workers’ Comp Covers the Basics, Not Everything

Workers’ compensation exists as what’s called an exclusive remedy. In plain terms, it means an injured employee generally can’t sue their employer over a workplace injury, no matter how much the employer contributed to it through poor training or lax supervision. In exchange, the worker gets medical coverage and partial wage replacement without having to prove anyone did anything wrong.

It’s a trade-off. Workers get paid faster and without a fight over fault, but they give up the right to pursue the kind of damages, like pain and suffering, that a personal injury lawsuit can bring. That trade only applies to the employer, though. It doesn’t extend to everyone else who might have played a role in why the equipment failed in the first place.

Where the Employer’s Shield Ends

This is where a lot of injured workers assume the story ends, and it usually doesn’t. If a piece of equipment failed because of a design flaw or a manufacturing defect, the maker of that equipment can potentially be sued directly under a products liability theory, separate from any workers’ comp claim. The same goes for a company hired to inspect or service the machine if it missed something it should have caught, or a rental outfit that handed over equipment without doing the maintenance checks it was supposed to do.

On a lot of job sites there’s also another employer in the mix entirely, a different subcontractor whose crew was operating the machine or working nearby when it failed. None of these third parties get the protection an employer gets under workers’ comp law. If their negligence contributed to the failure, they can be held liable in an ordinary lawsuit, and that claim can run alongside a workers’ comp claim rather than replacing it.

How This Plays Out in Practice

Say a framing crew rents a scissor lift for a two week job. The lift’s brake system fails on a minor incline and a worker is thrown, breaking an arm. Workers’ comp covers the ER visit and a chunk of lost wages right away, no questions asked about fault. But if it turns out the rental company skipped its pre-rental inspection, or a hydraulic seal was already failing when the unit left the yard, that’s a separate claim against the rental company entirely.

The worker isn’t choosing between the two paths. In practice they usually run both at once, with different lawyers, different timelines, and different pots of money, and the workers’ comp claim rarely waits on the outcome of the other one.

Why This Shows Up So Often on Construction Sites

Equipment failure isn’t a rare accident category in this industry. Struck-by and caught-in-between incidents, the categories that usually involve machinery, scaffolding, or heavy equipment rather than a fall or an electrical hazard, account for roughly one in ten construction deaths in a given year. It’s also not a coincidence that machine guarding and powered industrial trucks are consistently among OSHA‘s most frequently cited standards nationwide.

A lot of that comes down to fleets that mix owned, rented, and borrowed equipment on the same site, sometimes with two or three different maintenance schedules running at once and nobody fully owning the question of whose turn it was to check the brakes. Between rented equipment, aging machinery, tight schedules that cut into maintenance windows, and multiple crews sharing the same tools, there are many places for something to go wrong that has nothing to do with the worker who got hurt.

What It Means for the Companies Running the Job, Not Just the Worker

For general contractors and subcontractors, this isn’t only a question that matters after someone gets hurt. Rental agreements, maintenance logs, and inspection records often become the evidence that decides who pays, including whether a claim lands on the equipment owner, the manufacturer, or gets pushed back to a contractor through an indemnification clause buried in a subcontract.

Workers’ comp insurers have a financial interest here too. When they pay out a claim, and it later turns out a third party was actually at fault, the insurer can pursue that party to recover what it paid, and that process can eventually pull a general contractor back into the dispute even though the original claim never touched them directly.

Some subcontract templates already include subrogation waivers or additional insured language meant to head this off before it becomes a fight, and it’s worth having someone actually check whether that paperwork still matches how equipment gets rented and shared on the sites you’re running today. Clean records on equipment inspection, maintenance, and who was responsible for what on a shared site aren’t just good practice. They often determine how a dispute like this gets resolved months or years down the line.

None of this changes the immediate reality for an injured worker, who still files with workers’ comp first no matter what caused the failure. But the employer’s role is rarely the whole picture, and when equipment fails, responsibility often traces back further than the job site itself. For workers facing this kind of overlap in South Carolina, a Charleston Construction Injury Attorney can help determine whether a third-party claim may exist alongside workers’ compensation benefits.

Share this post :

Facebook
Twitter
LinkedIn
Pinterest

Stay close to the industry.

CCR updates, digital magazines, events, and partner insights.

Current Issue — CCR #10

Editorial & Third-Party Content Notice: Articles, press releases, company announcements, and accompanying media (including photography, graphics, and video) published on this site may be provided by third-party contributors, PR representatives, or wire sources as cited. Authorship and original copyrights remain with their respective holders.

Commercial Construction & Renovation is a registered service provider under the Digital Millennium Copyright Act (DMCA). To submit an inquiry, copyright claim, or formal takedown request, you may view our registered agent listing and official contact details via the U.S. Copyright Office DMCA Designated Agent Directory, or contact our compliance desk directly at publisher@ccr-mag.com.

Receive the CCR 2024 Idustry Report

Get ahead of your Competitors with CCR's FREE Industry Insider's Report 2024!

Always stay two steps ahead of your Competitors. Stay informed with the latest in the Industry. 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

This site uses cookies to ensure that you get the best user experience. By choosing “Accept” you acknowledge this and that ccr-mag.com operates under the Fair Use Act. Furthermore, Changing privacy laws now require website visitors from EEA based countries to provide consent in order to use personalized advertising or data modeling with either Google Ads & Analytics. Find out more on the Privacy Policy & Terms of Use Page and our Editorial & DMCA Notice.