Soft landscaping is the living part of a commercial site: trees, shrubs, groundcovers, turf, soils, mulch, and irrigation. Done well, it provides shade, screening, amenity, and stormwater benefits. For facility and property managers in Sydney and wider New South Wales, it can also create planning and maintenance risk. Resolve the plant palette, soil, and water plan early and the site is more likely to perform with lower maintenance demand; leave them too late and you invite reactive callouts, plant loss, and compliance gaps.
This guide is written for the coordination side of commercial landscaping. It connects design decisions with NSW planning controls, water and stormwater targets, and post-handover maintenance. The aim is simple: know what to standardise across your portfolio, what to localise by council area, and how to brief design teams and contractors so the softscape holds up.
Softscaping, scoped for commercial projects
It helps to think of soft landscaping as a set of living systems that must work over years, not a single installation event. Plants shade pavements and facades. Turf carries foot traffic on high-use lawns. Soils and mulch hold moisture and support root growth. Irrigation keeps the landscape viable through establishment and dry periods. Each part needs a clear specification, a relevant standard, and a realistic maintenance window.
Step 1: Lock the compliance frame early
Start with the controls that apply to the site. On 23 June 2025, the City of Sydney approved DCP updates that added deep soil requirements, standardised what a landscape plan must contain, and introduced incentives for rooftop gardens. These changes sit alongside the City of Sydney Urban Forest Strategy target of 27% canopy cover by 2050.
Other LGAs set their own numbers, so do not apply one council’s rule to another site without checking. Newcastle’s DCP, for example, requires soft landscape and deep soil planting areas sized to support medium to large trees. Confirm the deep soil, canopy, setback, and documentation requirements for the actual local government area before briefing a designer.
Step 2: Site analysis for plant performance and water
Before selecting plants, work through the physical realities of the site: sun and wind exposure, heat island effects across hard surfaces, overshadowing from buildings, buried services, and the soil profile, including drainage. In the City of Sydney, DA documentation must integrate stormwater drainage into both building and landscape drawings, including detention and roof falls, so infiltration and drainage should shape the planting layout from the start.
Where existing site soils may be reused, require soil testing. Council standard drawings often reference AS 2303:2018 for tree stock and AS 4419:2018 for topsoil specifications. Calling these up in your brief gives contractors a clear, checkable benchmark.
Step 3: Water-wise design
A water-wise softscape comes from three decisions working together: plant palette, hydrozones, and irrigation method. Hydrozoning groups plants with similar water needs so each area can be watered appropriately. For garden beds and tree pits, microirrigation or drip is usually the sensible default. The US EPA notes that microirrigation systems can use 20 to 50% less water than conventional sprinklers, reducing running costs and supporting applicable water standards.
Step 4: Stormwater and water-sensitive urban design
Commercial teams often use a familiar set of water-sensitive urban design elements: biofiltration raingardens at car parks and forecourts, tree pits with structural soils, and permeable paving in walkways and parking bays. These elements need to be shown consistently across landscape and hydraulic drawings so they do not fall between disciplines.
For City of Sydney DAs over 1,000 square metres, be ready to demonstrate pollutant-load reduction targets: 90% for litter, 85% for total suspended solids, 65% for total phosphorus, and 45% for total nitrogen.
For commercial property managers implementing these systems, practical knowledge of site-specific conditions is crucial. Biofiltration gardens, tree pits with structural soils, and permeable paving all require detailed specification to perform over time. When developing softscape strategies across your portfolio, consider exploring soft landscaping services in Sydney as a reference for how plant-forward design, soil preparation, turf setup, and horticultural maintenance integrate with broader site performance requirements.
Review these numbers with your engineering team early so the landscape design supports them rather than working against them.
Step 5: Planting details that pay off
Good detailing prevents rework. Specify right-sized stock to AS 2303, and set out planting hole width and depth, rootball handling, staking, and initial watering. Mulch specification is worth making explicit. As a local reference point, the City of Gosnells in Western Australia specifies mulch applied to a depth of 100 mm in its landscape plans. Confirm the depth your own council or specification requires.
Step 6: Heat, shade, and user comfort
Canopy does practical work on a commercial site. Trees shade pavements and facades and reduce radiant heat exposure for people using the space.
Beyond canopy placement, the full landscaping system, including hardscape coordination, turf selection, and drainage integration, contributes to overall site functionality and user experience. For property managers overseeing multi-site portfolios, understanding the full scope of exterior construction services, including landscaping integration, helps align softscape specifications with broader commercial project standards. This ensures consistency in how green spaces, turf installation, tree placement, and walkway design work together across different properties.
When you plan tree placement, prioritise areas where users linger or queue, such as car parks, entries, waiting areas, and outdoor dining spaces. Council heat mapping, where available, can help justify where canopy will deliver the most comfort benefit.
Step 7: Maintenance and budgets
Build maintenance into the brief, not into the afterthought. Plan for a one-year establishment period followed by a multi-year maintenance schedule, with defined windows for pruning, irrigation checks, fertiliser, and mulch top-ups. Industry guidance often recommends moving from reactive to preventive maintenance with seasonal scheduling. This makes costs more predictable and reduces emergency callouts.
Set acceptance criteria and warranty terms tied to the standards you specified. For example, requiring AS 2303 conformance at handover gives you a clear basis to reject substandard stock. Seasonal risk is real, so predictive budgeting across the year is more reliable than scrambling when something fails in peak summer.
Sydney-local resources and when to bring in specialists
Match the specialist to the trigger. A landscape architect is worth engaging when the site is complex or DA scrutiny is high. A landscape designer may be enough for simpler layouts. Bring in an arborist when existing trees or canopy targets are in play, and a water-sensitive urban design engineer when you need to meet stormwater and pollutant-load targets. For readers operating in Sydney, consider exploring soft landscaping services in sydney as a local example of plant-forward garden design, soil preparation, turf setup, and horticultural maintenance options.







