Cedar is one of the few exterior materials that gets more interesting with age, and one of the few that punishes vague specifications. A shingle wall detailed properly can run decades with nothing more than periodic inspection and spot repair. The same material, ordered in the wrong thickness, fastened with the wrong nail, or installed over a wall that cannot dry, will cup, split and streak within a handful of seasons. The difference almost always traces back to decisions made weeks before anyone opens a bundle.
For commercial and residential teams weighing cedar against fiber cement, engineered wood or metal, the useful conversation is not “is cedar durable.” It is “what exactly am I ordering, and what does the wall behind it need to look like.” Here is how experienced estimators and architects break that down.
Shingles and shakes are not interchangeable
The terms get used loosely on jobsites, which causes real problems at delivery. Shingles are sawn on both faces. They come to a uniform taper, lie flat, and produce the crisp, tailored coursing you see on coastal architecture and on well-detailed commercial facades. Shakes are split, at least on the exposed face, so they carry a rougher texture, more thickness variation, and a heavier shadow line.
That textural difference drives everything downstream. Sawn shingles accept a tight, consistent exposure and work beautifully with woven corners and keyway detailing. Shakes want a longer exposure and more generous spacing, and they rarely look right trying to imitate a fine-lined shingle wall. Choose the look first, then let the product follow, rather than ordering shakes and hoping they behave like shingles.
Grade, thickness and exposure
Higher grades mean clear, edge-grain, heartwood stock with no flat grain or sapwood on the exposed portion. That matters because flat grain cups and sapwood decays faster when it stays wet. Lower grades exist for good reasons, including undercourses and utility work, but they do not belong on a prominent elevation where owners will be looking at the wall from ten feet away for the next twenty years.
Exposure is the other half of the equation. Shorter exposures mean more courses per square, more labor, more material and a wall that reads finer. Longer exposures read bolder and go up faster, but they reduce the number of layers covering each nail line. Pin that number down in the drawings, because a quarter-inch of drift across a tall elevation becomes a visible problem at window heads.
Species choices and how they age
Western red cedar is the familiar workhorse: dimensionally stable, available in longer and wider stock, and warm in tone when new. It suits pattern siding, trim and timber work as readily as it suits shingles, which makes it practical when one species needs to carry several parts of an exterior.
White cedar, including Atlantic white cedar, is the traditional choice where owners want that silvered coastal patina. Left uncoated, it weathers to a soft gray that many designers specify deliberately. If that is the goal, say so in writing, because the same wall sealed with a film-forming coating will never get there. For a plain-language look at how these shingles behave in service and what maintenance actually involves, this practical guide to white cedar shingles is a reasonable orientation before you sit down with a supplier.
The wall behind the cedar decides its lifespan
Cedar’s natural oils resist decay, but no wood survives being trapped against a wet surface. The single most valuable upgrade on a shingle project is a drainage gap: a rainscreen mat, furring strips, or a mesh underlayment that lets both faces of the shingle dry and lets incidental water drain out at the bottom.
- Fasten with hot-dipped galvanized or stainless nails. Electro-galvanized fasteners bleed black streaks, and cedar’s tannins will find any unprotected steel.
- Place nails so each one is covered by two courses above and keep them out of the exposed area entirely.
- Leave a small gap between adjacent shingles so the wood can swell without buckling, and offset joints course to course by a comfortable margin.
- Flash sidewall-to-roof junctions, window heads and transitions properly; most cedar failures are flashing failures wearing a wood costume.
- Hold the bottom course clear of grade, decking and roofing so splash-back and snow do not keep the butts saturated.
Those choices also feed into the broader assembly conversation about moisture, movement and appearance, the same calculus covered when teams compare exterior material picks that balance durability and design across a portfolio of projects. Cedar competes well when the detailing is honest about water management and poorly when it is treated as a surface finish stapled to a flat wall.
Sourcing: where schedules get saved or lost
Cedar is a natural product with real variability in grade, moisture content and availability by profile. A supplier who understands exterior work will ask questions that a general lumber desk will not: what exposure, what corner treatment, pre-stained or raw, what trim profiles need to match, and whether the timbers and millwork should come from the same species run so the color story holds together. Those questions are a good sign, because they prevent the mismatched-bundle problem that shows up when a wall is half-complete.
This is the point where teams benefit from working with a specialist rather than a generalist. Liberty Cedar, for example, functions as a cedar shingles and shakes supplier alongside Western red cedar lumber, pattern siding, timbers, white cedar and Atlantic white cedar stock, mouldings and custom millwork, which means a single conversation can cover the shingle field, the trim profiles around it and the heavier structural elements over an entry. For architects and remodelers, that breadth matters mostly because it keeps species, texture and detailing consistent across an elevation instead of stitching a facade together from unrelated orders.
Finishing, or deliberately not finishing
Three paths are common, and the owner should choose one knowingly. Leave the cedar raw and let it weather, accepting uneven graying on elevations with different sun and rain exposure. Apply a penetrating oil or semi-transparent stain to slow weathering and keep tone more uniform, with periodic reapplication built into the maintenance plan. Or specify factory-applied finish, which coats all faces before installation and removes the weather dependency from the schedule.
What does not work is a solid, film-forming paint on a wall that cannot dry. Trapped moisture pushes coatings off from behind, and the resulting peeling gets blamed on the wood. If the design calls for an opaque look, the rainscreen and back-priming are not optional extras.
A short pre-order checklist
- Confirm shingle versus shake and state the texture expectation in the specification.
- Lock in grade, species, thickness and exposure before pricing the labor.
- Decide corner treatment, woven or mitered or trimmed, since it changes material quantity.
- Specify fasteners by material, not just by size.
- Draw the rainscreen, the flashing and the bottom termination.
- Choose the finish strategy and write the maintenance interval into the owner’s manual.
- Coordinate trim, millwork and timber elements with the same species run.
Why the groundwork pays off
Cedar rewards projects where someone takes responsibility for the details. The material itself is forgiving of weather and unforgiving of shortcuts, which is a fair trade for a facade that develops character instead of simply fading. Sort out the species, the grade, the exposure and the drainage before the first bundle lands on site, and the wall will look intentional on day one and still look intentional long after the scaffolding is gone.







