The roof of your house contributes a large part to your safety and comfort. You don’t just need a roof over your head, you need your roof to be installed perfectly so that it doesn’t pose any threat to your safety and comfort.
A bad roof can put you in harm’s way and sometimes the consequences of a bad roof on your house can be devastating. This article will explain some signs to know that your roof has been badly installed.
8 Signs of a Bad Roofing Job
Below are some of the tell-tale signs of a badly installed roof:
-
Sagging Rooflines
If you notice that the rooflines in your roof are sagging, that’s evidence of bad roof installation. Sagging roofs can be easily identified as you will not notice any part of the roof sagging if it is properly installed. If you notice that some parts of the roof are sagging, it may be as a result of a problematic framing or a rot in the roof deck. This could mean that your roofing contractor didn’t perform an inspection before the roof replacement.
-
Damaged or Missing Shingles
Shingles can also be affected by harsh weather conditions. Sometimes they get damaged or they get completely removed. If you experience this problem immediately after a new roof replacement, you know the installation was badly done. You need to hire a professional to get your roofing job done to avoid it coming off after every storm.
-
Mismatched Shingles
A professional roof contractor isn’t expected to make the mistake of mismatching shingles on the roof. Unfortunately, some roof contractors do this thereby causing the roof to lose its aesthetic value.
-
Lack of Uniformity
After a new roof installation or replacement on your home, the roof on your home should have a uniform appearance. If after examining your roof from the ground level, you discover that they’re not uniformed on each side, then you know a bad installation job was done.
-
Reused Flashing
Most times, you’ll find some roof contractors reuse old flashing because they don’t want to spend much on materials. Saving money on quality materials does more harm than good as it leads to defects during installation. Reusing flashing can lead to leaking roofs. Roofing contractors should avoid reusing flashing as much as possible.
-
Water Leakage
Leaks can be a major problem to the structural body of your home and can even affect your items and belongings in the room. Whenever you experience a leak after a roof installation or replacement job, then the roofing contractor most likely did a bad job. You need to work with a professional Atlanta roof repair company like 1761 Renovations to avoid water leakage in your home.
-
Roof Stains
You can tell that a bad roofing job has been done when you begin to notice roof stains. Roof stains are not easily identified because it takes years to form. But when you begin to notice dark black stains on your ceiling you realize that your roofing contractor has probably done a bad job which means your roof is due for another replacement.
-
Missing Underlayment
To prevent water from lodging in the roof, roofing underlayment is necessary. Underlayment works as your roof’s waterproof system. However, a roof without an underlayment tends to deteriorate faster than roofs with underlayment and this happens due to bad installation.
Conclusion
Before you hire any roofing contractor, you must ensure they have the proper license and insurance and have years of experience. You can confirm their expertise by finding a referral from someone or asking the contractors to show you some of their past work.
At 1761 Renovations, we have the skills and expertise to carry out your roof installation or replacement perfectly. We also have testimonies from all our clients across Atlanta to prove that we’re the best choice for your roofing projects.
